| Yazarlar (5) |
Dr. Öğr. Üyesi Haluk Görkem ALCAN
Kafkas Üniversitesi, Türkiye |
Dr. Öğr. Üyesi Barış BAYRAK
Kafkas Üniversitesi, Türkiye |
Oğuzhan Çelebi
Atatürk Üniversitesi, Türkiye |
|
Oğuzhan Akarsu
Türkiye |
|
Abdulkadir Cüneyt Aydın
Atatürk Üniversitesi, Türkiye |
| Özet |
| The effect of styrene acrylic rubber (SAR) and styrene butadiene rubber (SBR) latex on some mechanical properties of concrete such as compressive and flexural strength was investigated, throughout this study. The mixes were prepared with polymer/cement ratio of 5%, 10%, and 15%. In addition, the effect of water/cement ratio and curing conditions on the mechanical properties of the composite was studied. It has been observed that the addition of SAR and SBR latex in polymer modified concrete results an improvement of flexural strength, conversely a negative effect on compressive strength. On the other hand, it has been observed that the water/cement ratio increases to a certain level and water+ air curing increases the mentioned mechanical properties of the composite. Although, for the high dosage of cement, it has been observed that the workability is decreased with the polymer ratio increase. Thus, the dosage of polymer latex needs to be adjusted, carefully. According to the results, it may be recommended to use polymer modified concrete with SAR latex for the conventional concrete structures and/or members within the affect of flexural loading (s). |
| Anahtar Kelimeler |
| Bildiri Türü | Tebliğ/Bildiri |
| Bildiri Alt Türü | Tam Metin Olarak Yayınlanan Tebliğ (Uluslararası Kongre/Sempozyum) |
| Bildiri Niteliği | Alanında Hakemli Uluslararası Kongre/Sempozyum |
| Bildiri Dili | İngilizce |
| Kongre Adı | International Conference on Advances in Engineering, Architecture, Science and Technology (ICA-EAST 2021) |
| Kongre Tarihi | 15-12-2021 / |
| Basıldığı Ülke | Türkiye |
| Basıldığı Şehir | Erzurum |
