| Yazarlar (6) |
Dr. Öğr. Üyesi Haluk Görkem ALCAN
Kafkas Üniversitesi, Türkiye |
Dr. Öğr. Üyesi Barış BAYRAK
Kafkas Üniversitesi, Türkiye |
Ali Öz
Atatürk Üniversitesi, Türkiye |
|
Oğuzhan Çelebi
Atatürk Üniversitesi, Türkiye |
|
Gökhan Kaplan
Atatürk Üniversitesi, Türkiye |
|
Abdulkadir Cüneyt Aydın
Atatürk Üniversitesi, Türkiye |
| Özet |
| The aim of this research is to investigate the change of physico-mechanical properties of geopolymer mortar (GPM) depending on fiber addition and different curing temperatures. In addition, in this study, total cost and CO2 emission analysis of GPM mixtures were made. Glass and carbon fiber with a length of 14 mm were added to the mixtures, and two different curing methods were applied to the samples as air curing and 75 °C heat curing. Both the addition of fibers and curing at 75 °C had positive effects on the physical and mechanical properties of GPM mixtures in different ways. The most dominant effect of the fibers was on flexural strength and deflection values. The bridging effect of the fibers increased the flexural strengths up to 397% (from 3.49 MPa to 17.38 MPa) and the deflection values up to 657% (from 0.07 mm to 0.53 mm). While the fibers added to the GPM mixture increased the specific fracture … |
| Anahtar Kelimeler |
| Geopolymer | Fiber synergy | Sustainability | Heat curing | Fracture energy | Cost analyses |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | Construction and Building Materials |
| Dergi ISSN | 0950-0618 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q1 |
| Makale Dili | Türkçe |
| Basım Tarihi | 02-2024 |
| Cilt No | 414 |
| Sayı | 135059 |
| Sayfalar | 1 / 14 |
| Doi Numarası | 10.1016/j.conbuildmat.2024.135059 |
| Makale Linki | http://dx.doi.org/10.1016/j.conbuildmat.2024.135059 |
| Atıf Sayıları | |
| WoS | 5 |
| Google Scholar | 10 |
