| Yazarlar (5) |
Dr. Öğr. Üyesi Tevfik Oğuzhan ERGÜDER
Kafkas Üniversitesi, Türkiye |
Fatih Yıldız
Erzurum Teknik Üniversitesi, Türkiye |
|
Onur Güler
Karadeniz Teknik Üniversitesi, Türkiye |
|
Murat İbrahim Sevim
|
|
Temel Varol
Karadeniz Teknik Üniversitesi, Türkiye |
| Özet |
| This study was on whether cemented carbide tools could be produced using cheaper and more readily available Ni binder instead of expensive Co binder using selective laser melting, which is a new generation production method that can be easily produced in the desired design without losing scrap. The study determined the optimum laser manufacturing parameters for the production of Ni coated WC powder by electroless deposition using the selective laser melting (SLM) method and produced turning inserts with those parameters. Production of SLM-based turning inserts, including Ni-coated WC powder (WC-Ni), encountered some problems due to lack of binder. Pure Ni powders were added to Ni-coated WC powders (WC-Ni + Ni) to improve bonding which increased relative density, reduced surface roughness and resulted in ∼95 % reduced wear rate. For optimum SLM conditions, the microhardness value … |
| Anahtar Kelimeler |
| WC-Ni powder | Selective laser melting | Wear | Cutting tools | Machining |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | International Journal of Refractory Metals and Hard Materials |
| Dergi ISSN | 0263-4368 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI |
| Dergi Grubu | Q1 |
| Makale Dili | İngilizce |
| Basım Tarihi | 03-2025 |
| Cilt No | 130 |
| Doi Numarası | 10.1016/j.ijrmhm.2025.107169 |
| Makale Linki | https://doi.org/10.1016/j.ijrmhm.2025.107169 |
| Atıf Sayıları | |
| WoS | 2 |
| Google Scholar | 2 |
