Tribological and thermal properties of plasma nitrided Ti45Nb alloy
Yazarlar (6)
İlyas Hacısalihoğlu Türkiye
Dr. Öğr. Üyesi Gürkan Kaya Erzurum Teknik Üniversitesi, Türkiye
Dr. Öğr. Üyesi Tevfik Oğuzhan ERGÜDER Kafkas Üniversitesi, Türkiye
Emre Mandev Erzurum Teknik Üniversitesi, Türkiye
Eyüphan Manay Erzurum Teknik Üniversitesi, Türkiye
Prof. Dr. Fatih Yıldız Erzurum Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | SURFACES AND INTERFACES (Q1) | ||
| Dergi ISSN | 2468-0230 Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 02-2021 |
| Cilt / Sayı / Sayfa | 22 / 0 / 8–0 | DOI | 10.1016/j.surfin.2020.100893 |
| Makale Linki | https://doi.org/10.1016/j.surfin.2020.100893 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
Eklemeli İmalat
Triboloji
|
||
| Özet |
| In this study, the effects of plasma nitriding surface treatment on the structural, tribological and thermal properties of Ti45Nb Beta alloy were investigated experimentally. Plasma nitriding process of Ti45Nb alloy was performed in 25% Ar-75% N2 gas mixture, for treatment times of 1–4 hours at the temperatures of 700–750 °C. The tribological tests of the plasma nitrided alloy were performed in dry sliding conditions. Thermal property measurements were applied to the plasma nitrided samples to determine their thermal conductivity and specific heat capacity. The TiNbN2 phase was observed in the compound layer formed after the nitriding process, and the compound layer and diffusion layer thicknesses increased depending on the nitriding temperature and duration. The highest microhardness was obtained for the sample nitrided at 750 °C for 4 hours and the hardness approximately twice increased compared to the … |
| Anahtar Kelimeler |
| Beta Ti | Ti45Nb | Plasma nitriding | Wear | Thermal properties |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 16 |
| Google Scholar | 31 |