| Yazarlar (5) |
Fırat Dumlu
|
Dr. Öğr. Üyesi Tevfik Oğuzhan ERGÜDER
Kafkas Üniversitesi, Türkiye |
|
Gürkan Kaya
Erzurum Teknik Üniversitesi, Türkiye |
|
İlyas Hacısalihoğlu
Türkiye |
|
Fatih Yıldız
Erzurum Teknik Üniversitesi, Türkiye |
| Özet |
| In this study, the tribological properties of tungsten carbide (WC) cutting tools coated with AlTiCN and CrCN ceramic films and their machining performance were investigated in both CNC vertical machining centre and lathe. The coatings were applied on end milling tools, lathe inserts and 12 × 12 × 5 mm sized test samples by cathodic arc physical vapour deposition (CAPVD) method. The plastic injection mould steel workpiece was machined with high-speed dry cutting by CNC vertical machining centre and with coolant by CNC lathe to determine the cutting and wear performance of coated and uncoated tools. According to the results, it was determined that AlTiCN has higher microhardness and adhesion value and lower wear rate value than CrCN. It was also determined that the tools coated with AlTiCN thin film have superior properties in terms of both mass loss and flank wear width after machining processes. |
| Anahtar Kelimeler |
| AlTiCN | CrCN | CAPVD | carbon nitride film | cutting tool | wear | imachining | surface roughness |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING |
| Dergi ISSN | 1749-785X Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q4 |
| Makale Dili | Türkçe |
| Basım Tarihi | 01-2022 |
| Cilt No | 16 |
| Sayı | 3 |
| Sayfalar | 19 / 275 |
| Doi Numarası | 10.1504/IJSURFSE.2022.125450 |
| Makale Linki | 10.1504/IJSURFSE.2022.125450 |
| Atıf Sayıları | |
| WoS | 2 |
| Google Scholar | 3 |
