Improvement of structural/tribological properties and milling performances of tungsten carbide cutting tools by bilayer TiAlN/TiSiN and monolayer AlCrSiN ceramic films
Yazarlar (4)
Ali Sezer Çam
Dr. Öğr. Üyesi Tevfik Oğuzhan ERGÜDER Kafkas Üniversitesi, Türkiye
Dr. Öğr. Üyesi Gürkan Kaya Erzurum Teknik Üniversitesi, Türkiye
Prof. Dr. Fatih Yıldız Erzurum Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | CERAMICS INTERNATIONAL (Q1) | ||
| Dergi ISSN | 0272-8842 Dergi Bilgileri (2022) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 09-2022 |
| Cilt / Sayı / Sayfa | 48 / 18 / 26342–26350 | DOI | 10.1016/j.ceramint.2022.05.318 |
| Makale Linki | https://doi.org/10.1016/j.ceramint.2022.05.318 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
Eklemeli İmalat
Triboloji
|
||
| Özet |
| In this study, bilayer TiAlN/TiSiN and monolayer AlCrSiN ceramic films were grown on carbide cutting tool material by cathodic arc physical vapor coating (CAPVD) method to improve the structural/tribological properties and milling performances. The ceramic films were applied on cylindrical test samples and carbide end mills. The coated materials' structural, mechanical, and tribological properties were determined via scanning electron microscope (SEM), X-ray diffraction meter (XRD), tribometer, microhardness tester, and optical profilometer. DIN 40CrMnNiMo8-6-4 steel workpieces were machined by using a CNC vertical machining center to determine the actual working performance of the coated and uncoated cutting tools. The wear performance of the cutting tools after machining was determined by measuring the flank wear widths and mass losses. The hardness and adhesion results of the coated sample with … |
| Anahtar Kelimeler |
| Nitrides | Cutting tools | Wear resistance | Milling |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 17 |
| Google Scholar | 19 |