| Yazarlar (5) |
Caner Bulut
Iğdır Üniversitesi, Türkiye |
|
Fatih Yıldız
Erzurum Teknik Üniversitesi, Türkiye |
|
Temel Varol
Karadeniz Teknik Üniversitesi, Türkiye |
|
Gürkan Kaya
Erzurum Teknik Üniversitesi, Türkiye |
Dr. Öğr. Üyesi Tevfik Oğuzhan ERGÜDER
Kafkas Üniversitesi, Türkiye |
| Özet |
| The structural, tribological, mechanical, corrosion, and other properties of materials produced by laser-based powder bed fusion additive manufacturing methods are significantly affected by production parameters and strategies. Therefore, understanding and controlling the effects of the parameters used in the manufacturing process on the material properties is extremely important for determining optimum production conditions and for saving time and materials. This study aimed to determine the optimal laser parameter values for CoCrFeMnNi high-entropy alloy powders using the selective laser melting (SLM) method. The layer thickness was kept constant during experimentation. 5 different laser powers and 10 varying laser scanning speeds were tested, with hatch spacing from 30 to 90%. After determining the optimal laser parameters for SLM, prismatic samples were fabricated in different build orientations (0° … |
| Anahtar Kelimeler |
| High entropy alloys | Selective laser melting | Laser parameters | Structural properties | Wear | Corrosion |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | METALS AND MATERIALS INTERNATIONAL |
| Dergi ISSN | 1598-9623 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q1 |
| Makale Dili | Türkçe |
| Basım Tarihi | 01-2024 |
| Cilt No | 30 |
| Sayı | 11 |
| Sayfalar | 23 / 3004 |
| Doi Numarası | 10.1007/s12540-024-01694-w |
| Makale Linki | https://link.springer.com/article/10.1007/s12540-024-01694-w#citeas |
| Atıf Sayıları | |
| WoS | 10 |
| Google Scholar | 13 |
